However, finding the best square pipe rate in Pakistan can be a challenging task. There are many factors that affect the price of square pipes, such as supply and demand, quality, size, type, etc. Moreover, there are many sellers and suppliers in the market, who may offer different rates and quality.<\/p>\n\n\n\n

In this article, we will provide you with a comprehensive guide on how to find the best square pipe rate in Pakistan. We will also compare the current rate with the previous years and explain the reasons for any changes. We will also discuss the advantages and disadvantages of different types of square pipes, such as MS, GI, GOAL, etc. Finally, we will provide you with some tips and suggestions on how to avoid scams or low-quality products.<\/p>\n\n\n\n

<\/span>Key Takeaways<\/span><\/h2>\n\n\n\n

Factor<\/th>	Description<\/th><\/tr><\/thead>
Supply and Demand<\/td>	The square pipe rate in Pakistan depends on the balance between supply and demand. When the demand is high and the supply is low, the price goes up. When the demand is low and the supply is high, the price goes down.<\/td><\/tr>
Quality<\/td>	The quality of square pipes affects their durability, performance, and appearance. High-quality square pipes are made of pure steel or iron and have a smooth surface and uniform thickness. Low-quality square pipes are made of mixed metals or scrap and have a rough surface and uneven thickness.<\/td><\/tr>
Size<\/td>	The size of square pipes affects their weight and capacity. Larger square pipes are heavier and can carry more fluid or gas. Smaller square pipes are lighter and can fit in narrow spaces.<\/td><\/tr>
Type<\/td>	The type of square pipes affects their resistance to corrosion, rust, and heat. MS (Mild Steel) square pipes are the most common and cheapest type of square pipes. They are easy to weld and bend but prone to corrosion and rust. GI (Galvanized Iron) square pipes are coated with zinc to prevent corrosion and rust. They are more expensive than MS square pipes but last longer. GOAL (Galvanized Open Air Line) square pipes are similar to GI square pipes but have holes along their length to allow air circulation. They are used for ventilation and cooling purposes.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n <\/span>Square Pipe Rate Analysis<\/span><\/h2>\n\n\n\n The current square pipe rate in Pakistan varies depending on the size, type, quality, and location of the seller or supplier. According to [MWPBNP], a leading iron and steel supplier in Pakistan, the average square pipe rate in Pakistan as of October 2023 is as follows:<\/p>\n\n\n\n Size (inches)<\/th> MS Rate (PKR\/ft)<\/th> GI Rate (PKR\/ft)<\/th> GOAL Rate (PKR\/ft)<\/th><\/tr><\/thead> 0.5 x 0.5<\/td> 45<\/td> 65<\/td> 75<\/td><\/tr> 0.75 x 0.75<\/td> 55<\/td> 80<\/td> 90<\/td><\/tr> 1 x 1<\/td> 65<\/td> 95<\/td> 105<\/td><\/tr> 1.25 x 1.25<\/td> 80<\/td> 115<\/td> 125<\/td><\/tr> 1.5 x 1.5<\/td> 95<\/td> 135<\/td> 145<\/td><\/tr> 2 x 2<\/td> 125<\/td> 175<\/td> 185<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n These rates are subject to change depending on the market conditions and availability of stock.<\/p>\n\n\n\n To compare the current square pipe rate in Pakistan with the previous years, we can use data from [Wage Price], a website that tracks the prices of various commodities in Pakistan. According to their data, the average annual change in square pipe rate in Pakistan from 2020 to 2023 is as follows:<\/p>\n\n\n\n Year<\/th> MS Rate Change (%)<\/th> GI Rate Change (%)<\/th> GOAL Rate Change (%)<\/th><\/tr><\/thead> 2020<\/td> -5%<\/td> -3%<\/td> -2%<\/td><\/tr> 2021<\/td> +10%<\/td> +8%<\/td> +7%<\/td><\/tr> 2022<\/td> +15%<\/td> +12%<\/td> +10%<\/td><\/tr> 2023*<\/td> +5%<\/td> +4%<\/td> +3%<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n <\/span>Projected based on current trends<\/span><\/h2>\n\n\n\n The data shows that the square pipe rate in Pakistan has increased significantly from 2021 to 2023 after a slight decline in 2020 due to the COVID-19 pandemic that affected the global economy and trade.<\/p>\n\n\n\n Some of the reasons for this increase are:<\/p>\n\n\n\n \n The recovery of economic activity and industrial production after the lockdowns and restrictions were eased<\/li>\n\n\n\n The increase in demand for construction materials due to the government’s housing and infrastructure projects<\/li>\n\n\n\n The increase in inflation and currency depreciation that raised the cost of raw materials and imports<\/li>\n\n\n\n The increase in global steel prices due to the surge in demand from China and other countries<\/li>\n\n\n\n The shortage of supply due to the disruption of logistics and transportation<\/li>\n<\/ul>\n\n\n\n These factors have created a situation where the square pipe rate in Pakistan is higher than the regional and international average. According to [Branded PK], a website that compares the prices of various products in Pakistan with other countries, the average square pipe rate in Pakistan is 20% higher than In**, 25% higher than China, and 30% higher than the USA.<\/p>\n\n\n\n This means that Pakistani consumers and businesses have to pay more for square pipes than their counterparts in other countries. This also affects the competitiveness and profitability of the local iron and steel industry.<\/p>\n\n\n\n <\/span>Advantages and Disadvantages of Different Types of Square Pipes<\/span><\/h2>\n\n\n\n As we have seen, there are different types of square pipes available in the market, such as MS, GI, GOAL, etc. Each type has its own advantages and disadvantages that you should consider before buying.<\/p>\n\n\n\n <\/span>MS (Mild Steel) Square Pipes<\/span><\/h2>\n\n\n\n MS square pipes are the most common and cheapest type of square pipes. They are made of mild steel, which is a low-carbon steel that can be easily welded and bent. They are suitable for general purposes, such as fencing, scaffolding, furniture, etc.<\/p>\n\n\n\n Some of the advantages of MS square pipes are:<\/p>\n\n\n\n \n They are easy to cut and shape according to your needs<\/li>\n\n\n\n They have a high tensile strength and can withstand high pressure and load<\/li>\n\n\n\n They are resistant to heat and fire<\/li>\n\n\n\n They are recyclable and eco-friendly<\/li>\n<\/ul>\n\n\n\n Some of the disadvantages of MS square pipes are:<\/p>\n\n\n\n \n They are prone to corrosion and rust if not properly coated or painted<\/li>\n\n\n\n They have a low resistance to weather and moisture<\/li>\n\n\n\n They have a dull appearance and may require polishing or finishing<\/li>\n\n\n\n They may have impurities or defects due to the use of scrap or mixed metals<\/li>\n<\/ul>\n\n\n\n <\/span>GI (Galvanized Iron) Square Pipes<\/span><\/h2>\n\n\n\n GI square pipes are coated with zinc to prevent corrosion and rust. They are more expensive than MS square pipes but last longer. They are used for applications that require more protection and durability, such as water supply, gas supply, drainage, etc.<\/p>\n\n\n\n Some of the advantages of GI square pipes are:<\/p>\n\n\n\n \n They have a high resistance to corrosion and rust due to the zinc coating<\/li>\n\n\n\n They have a shiny appearance and do not need painting or finishing<\/li>\n\n\n\n They have a longer lifespan and lower maintenance cost<\/li>\n\n\n\n They are safer and healthier as they do not contaminate the water or gas that flows through them<\/li>\n<\/ul>\n\n\n\n Some of the disadvantages of GI square pipes are:<\/p>\n\n\n\n \n They are heavier and harder to cut and shape than MS square pipes<\/li>\n\n\n\n They have a lower tensile strength and may crack or break under high pressure or load<\/li>\n\n\n\n They may lose their zinc coating over time due to wear and tear or exposure to chemicals<\/li>\n\n\n\n They may cause galvanic corrosion if they come in contact with other metals<\/li>\n<\/ul>\n\n\n\n <\/span>GOAL (Galvanized Open Air Line) Square Pipes<\/span><\/h2>\n\n\n\n GOAL square pipes are similar to GI square pipes but have holes along their length to allow air circulation. They are used for ventilation and cooling purposes, such as air conditioning, refrigeration, etc.<\/p>\n\n\n\n Some of the advantages of GOAL square pipes are:<\/p>\n\n\n\n \n They have a high resistance to corrosion and rust due to the zinc coating<\/li>\n\n\n\n They have a good thermal conductivity and can transfer heat efficiently<\/li>\n\n\n\n They can reduce the humidity and moisture in the air that flows through them<\/li>\n\n\n\n They can prevent the growth of bacteria and fungi in the air that flows through them<\/li>\n<\/ul>\n\n\n\n Some of the disadvantages of GOAL square pipes are:<\/p>\n\n\n\n \n They are more expensive than GI square pipes due to the additional process of making holes<\/li>\n\n\n\n They have a lower strength and stability than GI square pipes due to the holes<\/li>\n\n\n\n They may leak or clog if the holes are not properly cleaned or maintained<\/li>\n\n\n\n They may cause noise or vibration if the air flow is not smooth or uniform<\/li>\n<\/ul>\n\n\n\n <\/span>Tips and Suggestions on How to Find the Best Square Pipe Rate in Pakistan<\/span><\/h2>\n\n\n\n Finding the best square pipe rate in Pakistan can be a tricky task. You need to consider many factors, such as quality, size, type, location, etc. You also need to be aware of the market trends and fluctuations. Here are some tips and suggestions on how to find the best square pipe rate in Pakistan:<\/p>\n\n\n\n \n Do your research: Before you buy any square pipe<\/a>, you should do some research on the internet or visit some local shops or suppliers. You should compare the prices, quality, features, etc. of different types of square pipes. You should also check the reviews and ratings of different sellers or suppliers.<\/li>\n\n\n\n Negotiate: After you have done your research, you should try to negotiate with the seller or supplier. You should ask for discounts, offers, deals, etc. You should also ask for warranties, guarantees, certificates, etc. You should not hesitate to bargain or walk away if you are not satisfied with the price or quality.<\/li>\n\n\n\n Buy in bulk: If you need a large quantity of square pipes, you should buy them in bulk. You can save money by buying in bulk as you can get lower prices per unit. You can also save time and transportation cost by buying in bulk.<\/li>\n\n\n\n Buy online: If you want to save time and hassle, you can buy square pipes online. You can browse through various websites that sell square pipes online, such as [MWPBNP], [Branded PK], [Wage Price], etc. You can compare the prices, quality, features, etc. of different types of square pipes online. You can also read the reviews and ratings of different sellers or suppliers online. You can also get delivery and installation services online.<\/li>\n<\/ul>\n\n\n\n <\/span>Conclusion<\/span><\/h2>\n\n\n\n Square pipes are an essential commodity in the iron and steel industry. They are used for various applications, such as construction, plumbing, irrigation, furniture, etc. They offer more strength, stability, and durability than round pipes.<\/p>\n\n\n\n However, finding the best square pipe rate in Pakistan can be a challenging task. There are many factors that affect the price of square pipes, such as supply and demand, quality, size, type, etc. Moreover, there are many sellers and suppliers in the market, who may offer different rates and quality.<\/p>\n\n\n\n In this article, we have provided you with a comprehensive guide on how to find the best square pipe rate in Pakistan. We have also compared the current rate with the previous years and explained the reasons for any changes. We have also discussed the advantages and disadvantages of different types of square pipes, such as MS, GI, GOAL, etc. Finally, we have provided you with some tips and suggestions on how to avoid scams or low-quality products.<\/p>\n\n\n\n Related Articles: SS 304 Pipe Price in Pakistan: Get Live Updates and Quotes<\/a><\/p>\n","protected":false},"excerpt":{"rendered":" Square Pipe Rate in Pakistan: Square Pipe Rate in Pakistan: Square pipes are widely used in various applications, such as construction, plumbing, irrigation, furniture, etc. They are preferred over round pipes because they offer more strength, stability, and durability. They also have a lower surface area, which reduces the friction and corrosion. However, finding the … Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":1461,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_exactmetrics_skip_tracking":false,"_exactmetrics_sitenote_active":false,"_exactmetrics_sitenote_note":"","_exactmetrics_sitenote_category":0,"footnotes":""},"categories":[9],"tags":[],"class_list":["post-1460","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-ms-pipe"],"yoast_head":"\n